Paket

Kalkulator Vektor Satuan

Kalkulator ini membagi vektor dengan besarnya untuk memberi vektor satuan searah — misalnya ⟨3, 4⟩ menjadi ⟨3/5, 4/5⟩. Berlaku untuk vektor 2D, 3D, dan 4D, memberi jawaban tepat (dengan bentuk akar yang disederhanakan), dan memeriksa bahwa hasilnya berpanjang 1.

Komponen dipisahkan koma — 2, 3, atau 4 buah

Hasil

Masukkan nilai lalu ketuk Hitung untuk melihat hasilnya.

Rumus

v^=v∥v∥\hat{\mathbf{v}} = \frac{\mathbf{v}}{\lVert \mathbf{v} \rVert}

Divide each component by the magnitude of the vector.

∥⟨a,b,c⟩∥=a2+b2+c2\lVert \langle a, b, c \rangle \rVert = \sqrt{a^2 + b^2 + c^2}

The magnitude (length) of a vector, by Pythagoras.

Cara menggunakan kalkulator ini

  1. Type the components of the vector separated by commas, such as 3, 4 or 1, 2, 2. Fractions and decimals work too.
  2. Press Calculate to get the unit vector, its decimals, and the magnitude of the original vector.
  3. The steps show the magnitude found by Pythagoras, then each component divided by it.

Contoh soal

Easy: a 2D vector

|v| = √(3² + 4²) = √25 = 5.

Divide each component by 5: ⟨3/5, 4/5⟩.

Medium: a 3D vector

|v| = √(1 + 4 + 4) = 3.

The unit vector is ⟨1/3, 2/3, 2/3⟩.

Hard: a square root in the magnitude

|v| = √(4 + 1) = √5.

Divide and rationalise: 2/√5 = 2√5/5 and −1/√5 = −√5/5.

Unit vector ≈ ⟨0.894427, −0.447214⟩.

Kesalahan umum

  • Forgetting to square the negative components: (−1)² is 1, not −1.
  • Dividing by the sum of the components instead of the magnitude.
  • Trying to normalise the zero vector — it has no direction, so it has no unit vector.
  • Rounding the magnitude before dividing; keep √5 exact until the end.

Pertanyaan umum

What is a unit vector?

A vector of length 1. It keeps only the direction of the original vector, which is why it is used to describe directions.

How do I find the unit vector of a vector?

Find its magnitude with Pythagoras, √(a² + b² + c²), then divide every component by that magnitude.

How do I check a unit vector?

Square its components and add them: the total must be exactly 1. The calculator does this check automatically.